IMEI numbers and de/pre-registration

[Jonathan Carter]

@afzal_m will do

[Jonathan Carter]

@jonathan-carter still the same

I also get no success or failure from the module either

PENDING=0,SENT=0,ERROR=0[rdResp]: PENDING=0,SENT=0,ERROR=0

[Jonathan Carter]

@jonathan-carter I have a CSQ of

+CSQ: 20,99

and a STATS of :

>> AT+NUESTATS

"Signal power",-829[rdResp]: "Signal power",-829
"Total power",-720[rdResp]: "Total power",-720
"TX power",20[rdResp]: "TX power",20
"TX time",11725[rdResp]: "TX time",11725
"RX time",311912[rdResp]: "RX time",311912
"Cell ID",2362982[rdResp]: "Cell ID",2362982
"ECL",1[rdResp]: "ECL",1
"SNR",19[rdResp]: "SNR",19
"EARFCN",3747[rdResp]: "EARFCN",3747
"PCI",352[rdResp]: "PCI",352
"RSRQ",-131[rdResp]: "RSRQ",-131
OK[rdResp]: OK

[Jonathan Carter]

@jonathan-carter I looked up error 513 in the U-blox datasheets and it is :

513 Module not registered

[Jonathan Carter]

@jonathan-carter @afzal_m - can it be that I can’t get it regestered again on the net because this error 513 implies that the module is no longer registered ?

[afzal_m]

What I noticed yesterday (in your post with the IMEI), was that the last digit was missing.

And I also see another thing that is causing an issue (and also an improvement for our manuals, thanks!): there are some spaces and brackets in your device name.

So the best thing to do is:

1. Delete both devices (ave … and jc …)
2. Double check the IMEI (should be 15 digits)
3. Register it with a simple device name (alphanumeric)

Please let me know if this works!

[Jonathan Carter]

@afzal_m attempting now

[Jonathan Carter]

@afzal_m BINGO!!! it works

[Jonathan Carter]

@afzal_m here is another address to “delete” from the pre-registration of SODAQ

357518080040314

thanks

[afzal_m]

Just deleted it!

[Jonathan Carter]

@afzal_m Works !!!

[Jonathan Carter]

[afzal_m]

Looks like Adriaan is aiming to jam the network. I assume that met_twee_nullen is his device.

[Jonathan Carter]

@afzal_m haha , that is true